Direct IP network camera Bedienungsanleitung PDF herunterladen (Seite 3)

Grandstream Networks, Inc. Peering Grandstream Camera & IP Multimedia Phone Page 3 of 9

www.grandstream.com Configuration Guide Last Update : 04/2012

INTRODUCTION

The purpose of this document is to guide you to configure/monitor Grandstream IP cameras & IP Video

Encoders/Decoders and your Grandstream IP Multimedia Phone.

This guide is applicable to the following Grandstream IP cameras (GXV3651_FHD, GXV3662 with firmware

1.0.1.40 or higher; GXV3615, GXV3611_HD, GXV3611_LL, GXV 3601, GXV3601_HD, GXV3601_LL with

firmware 1.0.4.27 or higher) and IP Video Encoders/Decoders (GXV3501, GXV3504 with firmware 1.0.4.27or

higher; GXV3500 with firmware 1.0.1.40 or higher (Encoding functionality is used on GXV3500) and

GXV3140 (with firmware 1.0.7.50 or higher) and GXV3175 (with firmware 1.0.3.40 or higher)

Be aware that different firmware revisions may have different web interface formats and functionality.

TUTORIAL ENVIRONMENT

For this tutorial, we will be using Grandstream IP Multimedia Phone GXV3175 with firmware 1.0.3.40 and

Grandstream IP Camera GXV3651_FHD with firmware 1.0.1.40.

GXV3175 IP is 192.168.50.199

GXV3651_FHD IP is 192.168.50.143

Note: Make sure that both devices are set to use Static IPs; otherwise, the communication cannot be

established if one of them changes its IP from original one.

The Camera and the IP Multimedia Phone should be in the same Local Area Network; in the same

VPN, behind the same router or each has a public IP when in different networks. In other words; the

camera and the IP Multimedia Phone need to be able to reach each other.

This tutorial is separated in 2 parts:

PART ONE: MONITOR IP CAMERA FROM IP MULTIMEDIA PHONE CONFIGURATION

Step 1: Configure your IP Multimedia Phone

1. Access to the web interface of your IP Multimedia Phone by entering the IP of the IP Multimedia Phone

on your browser.

http://<IP_Multimedia_Phone_IP> (Default; username: admin, password: admin)

(i.e. http://192.168.50.199)

2. Go to Advanced Settings > General Settings and uncheck Use Random Port (Default is Yes).

1 2 3 4 5 6 7 8 9

Keine Kommentare

Direct IP network camera Bedienungsanleitung Seite 3